Skip to content

dhcp_provisioner

Overview

dhcp_provisioner is a role to build and deploy a DHCP configuration file to support Zero Touch Provisioning with Arista EOS devices.

Tip

The role supports two modes: offline and online:

  • Offline mode let you generate a configuration you can apply on your DHCP server after carefully reviewing it.
  • Online mode lets you generate and push configuration to CloudVision, RHEL, or Ubuntu-based Linux systems.

Role requirements

This role requires installing the arista.cvp collection to support CloudVision interactions.

ansible-galaxy collection install arista.cvp

Role Inputs and Outputs

Inputs

Inventory configuration

An entry must be part of the inventory to describe DHCP server.

all:
  children:
    TOOLS:
      hosts:
        dhcp_server01:

Module variables

Variables dedicated to DHCP device

  • fabric_group: Ansible group where devices are defined per type.
  • ztp_network_summary: Subnet where DHCP will listen for request.
  • ztp_pool_start: First IP available in the pool.
  • ztp_pool_end: Last IP available in the pool.
  • ztp_lease_time: Maximum lease time before devices lose IP. Renewal is max/2 (default is 300 sec).
  • ztp_mac_source: Define which mac-address field is used for identification: interface mac-address (interface) or system-mac-address (system). Default: system
  • ztp_mode: Define how role works either offline or online (Default offline).
  • avd_dhcp_provisioner_provision: Run arista.cvp.dhcp_configuration in either online or offline mode (Default true).

Example:

---
- name: Build Switch configuration
  hosts: TOOLS
  connection: local
  gather_facts: false
  tasks:
    - name: Create dhcp configuration file
      ansible.builtin.import_role:
        name: arista.avd.dhcp_provisioner
      vars:
        ztp_network_summary: 10.73.1.0/24
        ztp_pool_start: 10.73.1.200
        ztp_pool_end: 10.73.1.210
        ztp_lease_time: 300
        fabric_group: 'DC1_FABRIC'
        ztp_mac_source: system

This module also reads information from the fabric definition. For any node defined under spine, l3leaf, and l2leaf, the role generates a DHCP entry if mac-address is found. Entry is based on the following fields:

  • mgmt_ip: Management IP set as per eos_designs.
  • mac_address: MAC address used for DHCP. It can be either interface mac-address or system-mac-address.
# Spine Switches
spine:
  platform: vEOS-LAB
  bgp_as: 65001
  # defines the range of acceptable remote ASNs from leaf switches
  nodes:
    AVD2-SPINE1:
      id: 1
      mgmt_ip: 10.73.254.1/24
      mac_address: '0c:1d:c0:1d:62:01'
    AVD2-SPINE2:
      id: 2
      mgmt_ip: 10.73.254.2/24
      mac_address: '0c:1d:c0:1d:62:02'

This module also uses the cvp_instance_ip or cvp_instance_ips knobs to set correct registration URL. In case you need to extend the TerminAttr daemon, you should use an approach similar to the following code:

cvp_instance_ips:
  - < cvp instance 01 >
  - < cvp instance 02 >
  - < cvp instance 03 >
cvp_ingestauth_key: < Fake ingest key overwritten by custom_structured_configuration >

# CloudVision server information
custom_structured_configuration_daemon_terminattr:
  cvauth:
    method: "token"
    token_file: "< path to the token file >"

Outputs

  • DHCP configuration file under intended/configs/dhcpd.conf

Tasks

  1. Generate structured configuration for DHCP configuration as documented in arista.cvp.dhcp_configuration.
  2. Load generated variables.
  3. Create DHCP configuration file.
  4. If mode is online, apply configuration to DHCP server.

Requirements

Requirements are located here: avd-requirements

License

Project is published under Apache 2.0 License